Custom Logo Baseball Jerseys for Teams - Steel Blue Pinstripe

Custom logo baseball jerseys built in steel blue pinstripe, piece by piece

Custom logo baseball jerseys start with 100 percent polyester fabric and full-dye sublimation printing - the dye turns to gas and bonds directly into the fibers, so your team name, logo, numbers and pinstripes sit inside the fabric instead of on top. That matters every season. Colors printed this way won't crack, peel, or wash out after a doubleheader in July heat or a full fall-ball run. What you're looking at here is a steel blue body covered in gold pinstripes running top to bottom, with all lettering and numbers rendered in the same warm gold. Your club name arcs across the chest in bold script, a front number sits below it, and the whole design repeats consistently across every jersey in your roster order. Youth and adult sizing both come from a single quote request, so one order covers your 10U squad and your 18U travel team at the same time.

Custom button down baseball jerseys: the two-button henley placket

Custom button down baseball jerseys on this design use a two-button henley placket that closes at the collarbone with 2 gold sublimated buttons. The neckline is a clean round collar with no ribbing - the edge is finished flat and sits low enough for comfort through 9 innings without pulling at the throat. The placket runs from the collar down roughly 5 inches, flanked on both sides by the continuous gold pinstripe pattern, so the stripe doesn't break or shift at the button line. That seamless continuation is only possible with sublimation. A heat-pressed or screen-printed design would split at the placket seam, leaving a visible gap. Here the print wraps the entire front panel as one image, buttons included, so the finished look holds together whether the jersey is worn open or buttoned up. Your logo or club crest prints just above and to the left of the placket, exactly where it appears on the sample.

Adult baseball jerseys: set-in sleeves cut for a full range of motion

Adult baseball jerseys on this design carry short set-in sleeves cut straight from the shoulder seam. The sleeve sits close to the arm without binding, and the armhole binding is finished flat so it doesn't dig in on a swing or a dive. Gold piping trims the sleeve hem on each arm, repeating the same accent color running through the pinstripes across the body. That trim detail is visible on both the front and side views of this jersey. The pinstripe pattern continues unbroken across the shoulder and down the sleeve to the cuff band, which means the arm print aligns with the body print at the seam. Your design team can place a sleeve patch or a sponsor graphic on the upper arm if your program uses one - that print zone is part of the 4 customizable areas available on this jersey: chest nameplate, front number, back name and number, and sleeve patch.

Baseball jerseys with names and numbers: chest and back placement

Baseball jerseys with names and numbers use 3 dedicated print zones on the front of this design: the logo area at the upper left chest, the team name arc across the center chest, and the front number below the name. On the sample you can read 'Your Team' in a wide, rounded script arc with a sweeping tail underline, and the number '00' below it in block numerals, both in gold on the steel blue pinstripe field. The back carries 2 more zones: the player nameplate across the shoulders and the back number centered below it. Every player on your roster gets a unique name and number combination printed into their own jersey - no iron-on letters, no separate nameplate tags. The back name and number print as part of the sublimation run, so alignment stays exact and the print won't lift at the edges mid-season.

Baseball jerseys in bulk for teams: ordering a full roster in one run

Baseball jerseys in bulk for teams work best when the whole size run - youth XS through adult 3XL - goes into a single order. One quote covers every player, every size, every unique name and number. Your design team reviews 1 approved mockup for the full roster before a single jersey goes to print, so what you see is exactly what you receive. Teams ordering for multiple age groups or several squads get bulk pricing reflected in their quote. A club director ordering for a 12U, a 14U, and a 16U program submits one quote request and receives pricing for the combined run. Adding a player mid-season is straightforward: their name, number and size go back to the same mockup file and a single jersey prints to match the existing roster. You can request a team quote through the team order form or by tapping the Get Team Quote button on this page.

Two tone baseball jerseys: what the steel blue and gold pairing does

Two tone baseball jerseys in this steel blue and gold combination carry a classic look that reads well from the stands and on video. Steel blue is deep enough to anchor the design without disappearing in shadow, and gold at this saturation shows up against it without needing a dark outline. The pinstripe spacing on this jersey is close - roughly 10 stripes across the chest - which gives the body a textured look at distance while keeping the team name arc and front number fully legible. Gold piping on the sleeve hem ties the arm detail to the body stripe. All accent work - buttons, sleeve trim, lettering, numbers - stays in a single consistent gold, so there's no second accent color competing for attention. Your program can match those exact color values to your school or club colors when you submit your quote, and the design team builds your mockup to those specs before you confirm anything.

What sizes do these custom logo baseball jerseys cover for a mixed roster?

Custom logo baseball jerseys on this design come in youth and adult sizes, covering a full roster from younger travel players up through adult rec league and high school athletes in one order. Size runs from youth small through adult 3XL ship together in a single production run. You don't split orders by age group. Send your complete roster list - names, numbers, and sizes - with your quote request and the design team maps every player to the correct size from that single file. That's how baseball jerseys for a whole roster work here: one mockup, one approval, one production run, every player covered.

Do sublimated numbers on these jerseys peel or crack after a full season?

Sublimated numbers on custom logo baseball jerseys printed this way don't peel because there's nothing sitting on top of the fabric to lift. Sublimation converts dye into a gas that bonds into the polyester fibers at the molecular level - the color becomes part of the fabric itself. After a full season of machine washing on cold, the numbers look the same as they did on opening day. Heat-pressed or screen-printed numbers sit on the fabric surface, which is why they crack along flex lines after repeated washing and sun exposure. Sublimation has no surface layer to crack. Your players' names and numbers stay readable through a long tournament run or a full high school season without any touchup or replacement.

Spec list for these custom button down baseball jerseys

• Fabric: 100 percent polyester performance knit, moisture-wicking
• Print: full-dye sublimation, colorfast and fade resistant
• Style: two-button henley placket with round collar
• Sleeves: short set-in sleeves with gold piping at the cuff
• Pattern: gold pinstripe on steel blue body, full-body coverage
• Print zones: 4 front and back areas plus optional sleeve patch
• Sizes: youth small through adult 3XL in one roster order
• Care: machine washable, cold wash, hang dry

Custom logo baseball jerseys in this steel blue and gold pinstripe design suit travel teams, club programs, rec league squads, and high school rosters that want a classic look with sharp detail from the first pitch to the final out. Softball teams order the same jersey. Browse more team jersey designs if you want to compare styles, or check common questions about custom jerseys before you submit. Teams wanting matching pants can find those in our matching custom baseball pants collection. Send your roster - names, numbers, sizes, and your club logo - and K2 Sportswear builds your mockup within 24 hours of your quote request, at no cost, so you see the finished design before you commit to anything. Tap Get Team Quote or start your team order right now.