Full Print Custom Red Soccer Training Jersey - Crimson Black

Crimson and Black Gradient Red Soccer Training Jersey

That dot-burst gradient running from rich Crimson Red at the chest down to Jet Black at the hem is the first thing your squad will notice about this red soccer training jersey. The two colors don't just sit next to each other - they dissolve into one another through a halftone dot pattern that gets finer and finer toward the bottom of the jersey. A bold white side panel frames the left flank, and black trim locks down the V-neck collar and sleeve cuffs. Together, those 4 color elements - Crimson, Black, White, and the dot-burst gradient zone - give the jersey a sharp, modern look that reads as a serious club kit from across the custom soccer training jerseys category.

Dot-Burst Gradient Pattern Placement on Your Adult Soccer Practice Jersey

The halftone dot pattern starts at roughly mid-chest and expands downward, transitioning from solid Crimson Red into a field of dissolving dots before the color bottoms out in pure Jet Black at the hem. This isn't a simple two-tone colorblock - the dots themselves shift in size and density as they travel down the fabric, which is what creates that fading depth. Your chest crest sits above the gradient zone, so it reads clean against the solid Crimson field. The team name and player number land right in the center of the gradient, which means both elements pop against the transitional color band. The white side panel runs vertically from underarm to hem on the left side, adding a strong vertical line that makes the athletic cut look even leaner on the pitch. Black cuff trim repeats the collar trim color to tie the whole colorway together at the sleeve ends. Nothing here is accidental - every placement decision supports the way the jersey looks at full sprint during a training session.

Matching Your Club Colors with a Custom Printed Practice Jersey

Full-dye sublimation is the printing process that turns dye into gas and bonds it permanently into the polyester fibers. That's how K2 replicates the exact Crimson Red, Jet Black, and White you see here in your own club's specific shades. Send your hex codes or a reference color swatch and the K2 team matches them before a single jersey gets printed. Your custom soccer jerseys carry 5 personalization zones: chest crest, left sleeve badge, back player name, back player number, and sponsor placement across the chest or back. Every zone gets sublimated the same way - no separate screen print layer sitting on top of the fabric. That matters because mixed print methods age at different rates. With sublimation across all 5 zones, the crest fades at the same rate as the number, which is to say it doesn't fade at all under normal wash conditions. Sizes run from YS through 3XL across 11 options, so your full roster from the youngest squad player to the biggest goalkeeper fits in a single order through the get-a-quote page.

Keeping the Color Sharp: Moisture Wicking Practice Jersey Durability

Full-dye sublimation bonds color at the fiber level, not on the surface. That's the critical difference between a sublimated practice jersey and a screen-printed one. Screen printing deposits ink on top of the weave, and that layer eventually cracks, peels, and flakes after repeated washes. Sublimation has no surface layer to peel because the dye becomes part of the fiber itself. Machine wash the jersey at 30 degrees Celsius with like colors, tumble dry on low, and the Crimson and Black gradient will look identical to the day it arrived after an entire preseason of daily training sessions. UV exposure from outdoor pitch time won't bleach the red either - sublimated polyester holds color against sunlight far better than traditionally dyed fabrics. The 100 percent performance polyester base also pulls sweat away from the skin during high-intensity drills. Moisture-wicking works by moving perspiration from the inner surface of the fabric to the outer surface, where it evaporates. That process keeps your players cooler during intervals, small-sided games, and back-to-back training fixtures.

Complete Kit Contents

• 1 custom short-sleeve training jersey per player (no shorts included)
• Full-dye sublimation print covering the entire garment from collar to hem
• Crimson Red to Jet Black halftone dot-burst gradient across the body
• White contrast side panel running from underarm to hem on the left flank
• Black V-neck collar trim and matching black sleeve cuff trim
• 5 personalization zones: chest crest, left sleeve badge, back name, back number, and sponsor placement
• 100 percent performance polyester construction throughout
• Athletic cut with a tapered torso and set-in sleeves
• Size range from YS through 3XL covering 11 sizes
• Machine washable at 30 degrees Celsius, tumble dry on low
• Made to order with no pre-stocked inventory - every jersey printed to your specification

Print and Fabric Specs

• Fabric: 100 percent performance polyester, lightweight training knit
• Print method: full-dye sublimation, edge to edge across all panels
• Color permanence: will not crack, peel, or fade under normal wash and training conditions
• Neckline: V-neck with black sublimated trim band
• Sleeve: short sleeve with black cuff trim
• Fit: athletic cut, tapered through the torso
• Ventilation: moisture-wicking polyester construction across the full body
• Care: machine wash cold to warm, tumble dry low, no bleach

Practice Jerseys for Your Whole Team: Club Squads, Academies, and Rec Leagues

This jersey fits club squads running twice-weekly training sessions just as naturally as it fits an academy side preparing for a regional tournament. The Crimson and Black colorway reads as a serious matchday palette, so your players won't feel like they're wearing a throwaway practice top - they'll train in something that looks like it belongs on a real fixture lineup. School teams, rec leagues, and preseason camps all order this style through the custom soccer uniforms collection. The white side panel gives the jersey enough visual contrast to read clearly in low-light indoor training halls too. If your squad runs a red primary kit, this training jersey matches it close enough to rotate in and out of matchday drills without breaking your teamwear identity.

Your next step is simple. Head to the order form, drop in your roster size count, select sizes from YS through 3XL for each player, attach your crest file, and confirm your team name and number list. The K2 team handles the artwork, the color matching, and the print production from there. Pick your sizes and send them through.