Maroon Blue Colorway - Custom Reversible Basketball Uniforms

Maroon and Gold Reversible Basketball Uniforms - Every Detail Up Close

Which uniform gives your team two complete looks without buying two separate sets? This one does. Maroon and gold reversible basketball uniforms built on a halftone-dot fade give your roster a dark side and a light side in a single 2-piece set. The reversible jersey flips from a deep maroon body with light blue lettering to a light blue body with maroon lettering - same players, same numbers, completely different look in seconds. Matching shorts carry the same halftone-dot pattern at the hem and sit on an elastic waistband your players tighten with a drawcord. Everything is custom made to order and fully sublimated, so the color lives inside the polyester fibers instead of sitting on top. That means it will not crack, peel, or fade after a full season of back-to-back game days.

The V-Neck: Two Clean Looks, One Neckline

The neckline on this reversible jersey is a V-neck on both sides. That is not automatic with reversible construction - a sloppy double-layer edge bunches at the throat and digs in on a shooting motion. Here the V sits flat because the binding strip is sublimated and stitched tight to both layers at once. On the maroon side, light blue binding traces the V and reads clearly at the scorer's table. Flip to the reverse side and maroon binding cuts the same clean line against the light blue body. Your team name arcs across the chest in the contrasting color on each side, so referees and fans read the squad correctly no matter which side is showing. Player names can be printed on both sides too, so every player is identified at tip-off regardless of which look your coaching staff calls.

The Armhole Binding: Freedom on Every Jump Shot

Armhole binding is the detail that separates a uniform that moves from one that restricts. On this set, a narrow binding strip wraps the full circumference of each armhole on both layers of the reversible jersey. It keeps the raw edge from rolling outward during a fast break or a layup attempt. The binding matches the accent color on each side - light blue on the maroon side, maroon on the light blue side - so the contrast reads the same clean way from either direction. Sleeveless construction means nothing blocks the shoulder on a jump shot or an overhead pass. The armhole sits wide enough for a full-court press without the jersey riding up, and the bound edge stays flat through a double-overtime run. Double-sided basketball uniforms need this kind of edge finish on both layers, and this set delivers it.

The Side Panels: Ventilation Built Into the Cut

Reversible basketball jersey and shorts sets live or die by how they handle heat. This jersey runs a straight side panel from the armhole binding to the hem with no extra seam bulk to trap warmth against the ribs. The 100 percent polyester performance knit wicks moisture away from the skin and pushes it toward the surface where it evaporates. On the maroon side the body reads as a solid deep maroon with halftone dots rising from the hem. On the light blue side the same dots appear in maroon, rising from the hem of the light blue body. That shared dot pattern means the fabric weight is identical on both layers, so the jersey hangs and breathes the same way regardless of which side your players wear. Reversible travel basketball uniforms need that consistency because your team switches sides between venues and sometimes mid-practice - uneven weight changes how the jersey drapes and distracts players mid-game.

The Print Surface: Sublimation vs. Screen Print or Heat Transfer

Stock uniforms use screen print or heat-transfer numbers because it is cheaper at low quantities. The difference shows up after about twenty washes. Screen-printed ink sits on top of the fibers and begins to crack at the flex points - the chest, the shoulders, the back number. Heat-transfer vinyl peels at the edges. Full-dye sublimation works differently: dye is converted to gas under heat and pressure and bonded directly into the polyester fibers, so the color becomes part of the fabric. There is no layer to crack or peel because there is no layer - it is the fabric. On this set, the team name, front number, back number, and back name all go through the same sublimation process on both sides. Reversible high school basketball uniforms and reversible basketball uniforms for schools get 4 print zones per side, for 8 total print surfaces on one jersey. Your logo or crest fits on the chest as well. Colors are matched to your school or club palette, not picked from a limited swatch card.

The Shorts Waistband and Hem: Two Looks Below the Belt

The matching shorts on this set carry the halftone-dot pattern at the hem, mirroring the jersey fade so the full set reads as one designed uniform rather than two pieces thrown together. The waistband runs elastic all the way around with an interior drawcord your players tighten before tip-off. That two-point system - elastic plus drawcord - keeps the shorts in place through a full-court press without a player reaching down to adjust. The hem sits at a mid-thigh length that allows a full defensive slide and does not restrict a rebound jump. A player number prints on the lower left leg of the shorts, visible from the bench. The shorts are matching shorts to the reversible jersey. Browse our reversible basketball uniforms collection to see other colorways in this same cut and construction. Youth and adult sizing covers every player on a mixed roster, from the smallest guard to the tallest post player.

What You Get in This Reversible Uniform Set

• Reversible sleeveless jersey - maroon halftone-dot side and light blue halftone-dot side, V-neck, sublimated names and numbers on both sides
• Matching basketball shorts - halftone-dot hem pattern, elastic waistband, drawcord, player number on the leg
• 4 customization zones per jersey side: team name arc, front number, back number, back name
• Full-dye sublimation on 100 percent polyester - colorfast, will not crack or peel through a full season
• Youth and adult sizes available to fit a complete roster in one order
• Free design mockup delivered within 24 hours of your quote request, approved before any printing begins

Custom reversible basketball uniforms work hardest when your whole squad orders together. You get a consistent size run, matching color across every player, and bulk pricing built into your quote. Double sided basketball uniforms like this set also cut equipment costs for boys reversible basketball uniforms programs and club squads that run home-and-away schedules on a tight budget. Send your team name, logo, roster sizes, and colors through the team order form or tap the Get Team Quote button on this page. Our design team builds your mockup and sends pricing within 24 hours - you see the full set before a single jersey is printed. Check our ordering FAQs for details on the process, and browse custom basketball uniforms across every style we carry. If you want warm-up gear to match, custom shooting shirts in the same colors complete the bench look. K2 Sportswear handles everything from the first mockup to the finished set - your team steps onto the court looking like one unit from tip-off.